Consult International Marine’s INTERGARD brochure on NauticExpo. Page: 1/4. International Intergard is a high build, two component epoxy, pigmented with lamellar micaceous iron oxide for enhanced corrosion resistance and. Intergard is a two-pack epoxy coating, containing micaceous iron oxide, which can be overcoated after extended periods. Used as a.
|Published (Last):||20 October 2011|
|PDF File Size:||17.60 Mb|
|ePub File Size:||20.46 Mb|
|Price:||Free* [*Free Regsitration Required]|
DO NOT thin more than allowed by local environmental legislation. Apply in good weather. Get in Touch with us Astro Illumination. In the event welding untergard flame cutting is performed on metal coated with this product, dust and fumes will be emitted which will require the use of appropriate personal protective equipment and adequate local exhaust ventilation.
The Online Boating and Maritime Exhibition.
International Intergard – Rawlins Paints
The incorporation of plate-like micaceous iron oxide pigment both increases the barrier effect and improves long term overcoating properties of the system, making this material ideally suitable for application in the fabrication shop, prior to shipping, with final overcoating at site.
Application by brush is recommended for small areas only.
Chemical Resistant Coatings in Mumbai. Thoroughly flush all equipment with International GTA Apply in good weather.
INTERGARD – International Marine – PDF Catalogs | Documentation | Boating Brochures
If you do not fully understand these warnings and instructions or if you can not strictly comply with them, do not use this product. Overcoating information is given for guidance only and is subject to regional variation depending upon local climate and environmental conditions. The minimum purchase order quantity for the product is 1.
Material is supplied in 2 containers as a unit. Overcoating information is given for guidance only and is subject to regional variation depending upon local climate and environmental conditions. Frequency of cleaning will depend upon amount sprayed, temperature, relative humidity and elapsed time, including any delays.
Read and follow all precautionary notices on the Material Safety Data Sheet intfrgard container labels. Application by roller is recommended for small areas only.
Use International GTA only in exceptional circumstances. If the shop primer shows extensive or widely scattered breakdown, overall sweep blasting may be necessary.
International Intergard 400
Prior to use, obtain, consult and follow the Material Safety Data Sheet for this product concerning health and safety information. Proper ventilation and protective measures must be provided during application and drying to keep solvent vapour concentrations interbard safe limits and to protect against toxic or oxygen deficient hazards.
Optimum performance is achieved when Intergard is applied over blasted steel. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. Ideally suited as a damage and handling resistant coating which can be factory applied and thenovercoated on site with minimum surface preparation.
I would like to hear about offers and services: VOC values are typical and are provided for guidance purposes only. For maximum performance ambient curing temperature should be Optimum performance is achieved when Intergard is applied over blasted steel. Interagrd is your responsibility to read the Product Data Sheets available below before you place an order and prior to application of the intregard. These may be subject to variation depending on factors such as differences in color and normal manufacturing tolerances.
Open the catalog to page 3. It is good working practice to periodically flush out spray equipment during interyard course of the working day.
Nature of Business Authorized Wholesale Dealer. The content of this website is our best recommendation and is not advice. Intact shop primers must be clean, dry and free from soluble salts and any other surface contaminants. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. This product is no longer in stock.
High pressure fresh water wash or fresh water wash, as appropriate, and remove all oil or grease, soluble contaminants and other foreign matter in accordance with Intergzrd solvent cleaning.
When used as part of an approved scheme, this material has the following certification: The incorporation of plate-like micaceous iron oxide pigment both increases the barrier effect andimproves long term overcoating properties of the system, making this material ideally suitable forapplication in the fabrication shop, prior to shipping, with final overcoating at site.
Actual safety measures are dependant on application methods and work environment. Petersburg, Russia, phone: Related Searches Marine epoxy filler International Marine antifouling International Marine epoxy primer International Marine anti-corrosion primer Zinc primer International Marine merchant ship antifouling International Marine merchant ship primer High-gloss coating International Marine professional vessel antifouling International Marine professional vessel primer International Marine topcoat coating International Marine multi-use antifouling Intedgard primer International Marine two-component coating Tin-free antifouling Zinc coating International Marine epoxy coating Acrylic coating International Marine tank coating International Marine coating.
Consult your local International Paint representative for specific recommendations.
Number of Employees Upto 10 People. Do not exceed pot life limitations.
Products Marine Coatings Marine chemicals Marine lubricants.